Filter
Top Products
2
(Optional) Quick Start for SNMP Management
4. Use the null-modem cable to connect the Console Mgmt port to a COM port on a
workstation.
5. Open a terminal emulation program (such as Terminal in Microsoft Windows* 3.1).
Specify these communication parameters:
• 9600 baud
• 8 data bits
• No parity
• 1 stop bit
6. Press
EE
EE
E and log into the Console Manager:
Login:
password:
By default, no password or user name is assigned. If you enter one, it is saved upon reset.
7. Set the IP configuration using the set-ip-conf command:
set-ip-conf 192.1.1.64 255.255.255.0 192.1.1.255 E
Replace these addresses with the numbers for your network. Specify the IP address, netmask
(subnet mask), and broadcast address, in that order.
8. Download the Intel MIB (Management Information Base) file from an Intel online
service and compile into your NMS.
The MIB filename is SWCH1MIB.EXE. You can find the file on Intel’s Customer Support web
site (http://www-cs.intel.com) or the Intel BBS (see inside back cover). See your NMS
documentation for instructions on compiling the MIB for a new device.
Console Mgmt
A null-modem cable is
provided with the switch.
PC-3442