Filter
Top Products
63
Technical InformationAppendix A
Status Indicators (per port)
Displays Link, Transmit, Receive, Collision, Flow Control/Full
Duplex, Management.
General Indicators
Displays Management activity, SNMP presence, power supply status,
device failure detection.
Boot and Configuration
NVRAM configuration loaded on power up and fully downloadable.
Firmware local or remote downloadable.
Connector Interfaces
UTP RJ-45 (MDI pin configuration)
RS232
SC fiber optic (on optional 100BASE-FX media adapter)
Maximum Cabling Distances
Switch to switch or switch to NIC:
Category 5 UTP: 328 feet (100 meters)
62.5/125µ multimode fiber: 1.2 miles (2 km) at full duplex
1351 feet (412 meters) at half duplex
Switch to repeater:
Category 5 UTP: 328 feet (100 meters)
62.5/125µ multimode fiber: Varies, ~1050 feet (320 meters) total
network diameter
Standards Supported
100BASE-TX Fast Ethernet
100BASE-FX Fast Ethernet
FDSE (Full Duplex Switched Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.1d (Spanning Tree)
SNMP (RFC 1157, etc.)
MIB II (RFC 1213, etc.)
Bridge MIB (RFC 1493)