Filter
Top Products
54
CHAPTER 2
Intel Express 100BASE-TX Switching Hub
Console command-line summary
Console Commands
help-kbd lists the help and shortcut keys
banner displays the Console Manager logo
clear clears the screen
login exits Console Manager and displays login screen
logout exits Console Manager and any active Telnet session
set-prompt changes the console prompt
set-passwd changes the console password
System Commands
sys-stat displays system status
warm-reset performs a warm reset of the switch
cold-reset performs a cold reset of the switch, like powering it on and off
get-last-err displays information about the last fatal error
init-nvram resets nonvolatile RAM (NVRAM) to default values
set-line-slip transfers the serial connection to SLIP mode
set-sw-file sets the SNMP agent software filename for download
set-par-file sets the SNMP agent parameters filename for automatic setup
set-fg-param sets the Ethernet frame generator parameters
start-fg starts the Ethernet frame generator
stop-fg stops the Ethernet frame generator
IP Commands
get-ip displays the current IP address
set-ip sets the IP address
get-ip-conf displays the current IP address, netmask, and broadcast address
set-ip-conf sets the IP address, netmask, and broadcast address
set-slip sets the SLIP address
get-slip displays the SLIP address
get-slip-conf displays the current SLIP configuration
set-slip-conf sets the SLIP configuration
get-gatew displays the default gateway