Filter
Top Products
46
CHAPTER 2
Intel Express 100BASE-TX Switching Hub
del-sec-vlan
del-sec-vlan {run|nvram} <
lan_id
>
Deletes the SVLAN specified by
lan_id
. use the get-svlan-tbl
command to see these ID numbers.
get-svlan-tbl
get-svlan-tbl {run|nvram}
Shows the table of defined SVLANs.
SYS_console> get-svlan-tbl run
RUNTIME SECURITY VIRTUAL LANs TABLE
================================
SVLAN ID P1 P2 P3 P4 P5 P6 P7
======================================
1: + - + - + - -
2: + + - - - - +
set-mon-port
set-mon-port <
port
>
Sets the port to be monitored.
port
is the port number. All traffic
from this port is duplicated, or mirrored, on the port specified by the
monitor command.
monitor
monitor <
port
>
Sets the monitoring port. All traffic from the port specified by
set-mon-port is duplicated on
port
.
stop-mon
Stops port monitoring.
Spanning tree commands
Spanning tree automatically configures a loop-free topology in a
bridged environment. The spanning tree agent is implemented in
conformance with the IEEE 802.1d standard. In most cases, the
defaults work fine and you won’t need to use these commands.