Filter
Top Products
Upgrading and Installing Server Components 27
Bezel
Opening and Closing the Front Bezel
With the bezel open you have access to all of your system’s front panel functions and indicators.
With the bezel closed you can protect critical functions and still view the system’s indicators.
To open the bezel, do the following:
1. Stand in front of the chassis and grasp the edges of the bezel from each side.
2. Gently pull the bezel towards you until it begins to separate from the chassis.
As the bezel separates from the chassis, allow it to swing to its open
position situated below the chassis.
3. As the bezel separates from the chassis, allow it to swing to its open position situated below the
chassis.
Figure 6. Opening the Bezel
To close the bezel, gently raise it upwards. The hinging mechanism will guide the bezel into the
correct position where it will snap shut.