Filter
Top Products
Configuration Software and Utilities 81
Figure 37. EMP Console in Redirect State
Figure 37 shows EMP Console window in redirect mode with the terminal window. The text that
appears on the server monitor displays in the Redirect window.
Availability of the various EMP Console features are determined by two factors: the BIOS
EMP access mode and if the server’s COM2 port is configured for console redirection. The three
EMP access modes are disabled, pre-boot, and always active.
Table 6. EMP Console Access Modes (Server configured for console redirection)
Mode Server is powered off During BIOS POST After OS boots
Disabled Redirect window appears,
but is blank
Redirect window Redirect window
Pre-boot EMP commands available Redirect window* Redirect window
Always Active EMP commands available Redirect window* EMP commands available
* The operation mode can be modified by selections in the Reset and Power on/off dialogs. These are server control
dialogs available in EMP Console.