Upgrading and Installing Server Components 43
System Mounts
There are two methods for installing the ISP2150, using the front bracket hardware or optionally
using rack rail system.
Installing the Front Bracket and Racking the System
The ISP2150 system comes with mounting bracket hardware that allows you to install it into
cabinets and relay racks. The following procedures describe how to mount the ISP2150 system in
each type of chassis.
Installing the Front Bracket in a Cabinet
1. Attach the left and right front brackets to
the system. Your system comes with left
and right front brackets (A in Figure 19)
and mounting bolts (B in Figure 19) to
attach them to the system. Mount the
brackets to the sides of the system with
the bracket flange flush with the front
panel.
2. Attach the rear support washer to the
system. The system also comes with two
support washers (C in Figure 19). Mount
one on each side towards the rear panel
of the system.
B A C
OM09334
Figure 19. Mounting the Front Brackets
and Support Washers
3. Mount the back support bracket to the
cabinet. Left and right rear support
brackets (A and B in Figure 20) also
come with the system. Mount the rear
brackets in the desired position in the
cabinet using the supplied mounting
bolts (C in Figure 20) supplied by the
cabinet manufacturer.
4. Slide the system into the back support
bracket. After attaching the rear
brackets, slide the system into the rack
using the support washers as rollers.
AC B
OM09336
Figure 20. Mounting the Back Support
Brackets