Filter
Top Products
62 ISP2150 2U Rack Server Platform Product Guide
Server Menu
You can make the following selections on the Server Menu itself.
Feature Choices Description
System
Management
Enters submenu.
Console Redirection Enters submenu.
PEP Management Enters submenu.
Enable Sleep Button Disabled
Enabled
Enables optional ACPI support for the sleep button.
PCI IRQs to IO-
APIC mappings
Disabled
Enabled
Enabled - BIOS can describe all 24 IO APIC pins in the
MP table for PCI interrupts. Not all MP operating
systems and drivers can understand this description of
the interrupts in the MP table.
Disabled - BIOS will only use 16 IO APIC pins in the
MP table for PCI interrupts. All PCI interrupts are routed
to a standard ISA IRQ pins on IO APIC. All operating
systems will work with standard ISA IRQ entries.
Processor Retest Yes
No
Yes tells BIOS to clear the historical processor status
and retest all processors on the next boot. BIOS
automatically resets to No in next boot.
Assert NMI on
SERR
Disabled
Enabled
Enabled generates an NMI on SERR.
Note: Bold type indicates the default choice.
System Management Submenu
Feature Choices Description
Server Management
Info
Enters submenu.
System Event
Logging
Disabled
Enabled
When enabled, system events will be logged by BIOS and
BMC in system event log.
Clear Event Log No
Yes
Yes clears the system event log (SEL) in BMC. BIOS
automatically resets to NO for next boot.
EMP Password
switch
Disabled
Enabled
Sets the EMP password.
EMP Password [A..Z, 0..9] This field only shows up when the EMP password switch
is enabled. Entering a password and pressing return will
send the password immediately to the BMC. If a beep is
heard the password was not accepted. If no password is
entered, anyone has access to the server through the
EMP Console.
EMP Escape
sequence
+++ Sets the escape sequence for the modem being used for
EMP. This will force the modem to command mode. This
is only used if the EMP direct connect/modem mode is set
to modem.
continued