Filter
Top Products
42 ISP2150 2U Rack Server Platform Product Guide
Power Supply
Removing and Re-installing a Power Supply
To replace the power supply:
1. Unplug the power cord from the power source and from the power cord receptacle (A) at the
right rear side of the system.
2. Remove the top cover of the system. Refer to “Opening the Cover” on page 29.
3. Remove and save the two screws (B) from the power supply cover (C).
4. Grasp the bottom edge of the power supply cover and lift it up and away from the power
supply.
5. Grasp the sides of the power supply and slide it forward, out of the chassis.
OM09324
A
B
C
Figure 18. Replacing the Power Supply
A. Power cord receptacle
B. Screws
C. Cover
6. Slide the new power supply into the chassis and make sure it is seated in the chassis connector.
7. Close the power supply cover and re-insert the screws you set aside earlier.
8. Re-connect the power cord to the power cord receptacle and plug the cord back into its power
source.