Filter
Top Products
Configuration Software and Utilities 65
PEP Filter Submenu
This submenu allows you to set which events or error conditions cause the system to page you.
Feature Choices Description
PEF Enable Disable
Enable
Enables the Platform Event Filtering. If this is enabled, and one of
the events you enable below occurs, the server will page you
using the Page String information.
Temperature Sensor Disable
Enable
Temperature out of range notification.
Voltage Sensor Disable
Enable
Voltage out of range notification.
Fan Sensor Disable
Enable
Fan failure notification.
Chassis Sensor Disable
Enable
Chassis intrusion notification.
Power Supply Sensor Disable
Enable
Power supply fault notification.
BIOS (SMI Handler) Disable
Enable
Uncorrectable ECC memory error notification.
BIOS POST Error Disable
Enable
POST error code notification.
FRB Sensor Disable
Enable
FRB failure notification.
Fatal NMI Disable
Enable
Fatal NMI notification.
Watchdog Timer Reset Disable
Enable
Watchdog timer reset/power down/power cycle notification.
System Restart Disable
Enable
System reboot notification.
Note: Bold type indicates the default choice.
Boot Menu
You can make the following selections on the Boot Menu itself.
Feature Choices Description
Boot-time Diagnostic
Screen
Disabled
Enabled
Enables or disables the diagnostic screen during system boot
operations. This screen is alphanumeric text that displays on
the monitor during a boot operation to report status about
such things as the boot memory test, the number & type of
processors, and the disk drives in the system.
When it is disabled, an image is displayed with a bar across
the top of the screen to indicate boot progress instead of the
detailed status information.
continued