Filter
Top Products
54 ISP2150 2U Rack Server Platform Product Guide
Starting Setup
You can enter Setup after power on or reset by pressing F2. After booting, you will see the
following prompt:
Press <F2> to enter SETUP
If CMOS/NVRAM has been corrupted, you will see other prompts:
Warning: cmos checksum invalid
Error 0271: check date and time settings
In this condition, the BIOS will load default values for CMOS and attempt to boot.
Setup Menus
To: Press
Get general help <F1> or <Alt+H>
Move between menus
← →
Go to the previous item
↑
Go to the next Item
↓
Change the value of an item + or -, F5, F6, space
Select an item or display a submenu <Enter> or <Alt+X>
Leave a submenu or exit Setup <Esc>
Reset to Setup defaults <F9>
Save and exit Setup <F10>
When you see this: What it means
On screen, an option is shown but you
cannot select it or move to that field.
You cannot change or configure the option in that menu screen.
Either the option is auto-configured or auto-detected, or you
must use a different Setup screen, or you must use the SSU.
On screen, the phrase Press Enter
appears next to the option.
Press <Enter> to display a submenu that is either a separate full
screen menu or a popup menu with one or more choices.
The rest of this section lists the features that display onscreen after you press <F2> to enter Setup.
Not all of the option choices are described, because (1) a few are not user selectable but are
displayed for your information, and (2) many of the choices are relatively self explanatory.