Filter
Top Products
IXD1110 Demo Board
Development Kit Manual 15
Document Number: 250807
Revision Number: 003
Revision Date: June 27, 2003
5.0 IXF1110 Software
The IXF1110 software allows access to the following register blocks through the Graphical User
Interface (GUI) or the Serial Monitor (HyperTerminal) interface:
• MAC Control
• MAC RX Statistics
• MAC TX Statistics
• Global Status and Configuration
• RX Block
• TX Block
• SPI4-2 Block
• SerDes Block
• GBIC Block
For additional information on all of the registers, please refer to the IXF1110 Datasheet or On-Line
Help.
Note: For help on using IXF1110 software, refer to the On-Line Help included in the software provided
with the IXD1110 demo board.
5.1 PC Requirements
The following is a list of the minimum PC requirements for installation of the IXF1110 software:
• Intel
®
Pentium
®
II 400 MHz or equivalent
• 128 MB RAM
• 16 MB Video Card
• Serial port
• Microsoft* Windows 98, 2000 operating system
Note: Microsoft* Windows 95, ME, NT, and XP have not been tested.
• Microsoft* Windows HyperTerminal
• 1024 x 768 minimum viewing resolution