Filter
Top Products
IXD1110 Demo Board
Development Kit Manual 17
Document Number: 250807
Revision Number: 003
Revision Date: June 27, 2003
• Parity: None
• Stops bits: 1
• Flow Control: None
3. Press the reset button switch SW1. The following message appears on the HyperTerminal:
MPC8xx PlanetCore Boot Loader v2.00
Copyright 2001 Embedded Planet. All rights reserved.
DRAM available size = 16 MB
wvCV
DRAM OK
Autoboot in 2 seconds.
ESC to abort, SPACE or ENTER to go.
4. Press the ESC key to stop the Autoboot. The following message appears on the
HyperTerminal:
Autoboot aborted.
>
5. Type the following at the > prompt:
> set ip 10.254.21.34 (Changes the IP address to the value entered)
> store (Permanently changes the IP address)
> reset (Restarts the IXD1110 demo board)
Once the Autoboot is complete, the GUI can access the IXD1110 demo board using the newly
programmed IP address.