Filter
Top Products
Power and Environmental Specifications Intel
®
Server Board S5000PAL / S5000XAL TPS
Revision 1.4
Intel order number: D31979-007
78
8.2.15 Residual Voltage Immunity in Standby Mode
The power supply shall be immune to any residual voltage placed on its outputs (typically a leakage
voltage through the system from standby output) up to 500 mV. There shall be no additional heat
generated, nor stress of any internal components with this voltage applied to any individual output, and all
outputs simultaneously. It also should not trip the power supply protection circuits during turn on.
Residual voltage at the power supply outputs for a no load condition shall not exceed 100 mV when AC
voltage is applied and the PSON# signal is de-asserted.