Filter
Top Products
TM700 User Guide - Configuring Your System
3 - 5
Main Menu
Primary and Secondary Master and Slave IDE Submenus
Table 3 - 3: Main Menu
Feature Choices or
Display Only
Description Your Setting
System Time HH:MM:SS Set the System Time.
System Date MM/DD/YYYY Set the System Date.
Legacy Diskette A Disabled
1.44/1.25 Mb 3½”
Hidden if not detected.
Primary IDE Master Selects sub-menu
Primary IDE Slave Selects sub-menu
Secondary IDE
Master
Selects sub-menu
Secondary IDE
Slave
Selects sub-menu
IDE Configuration Selects sub-menu
System Information Selects sub-menu
Table 3 - 4: Primary And Secondary Master And Slave IDE Submenus
Feature Choices or
Display Only
Description Your Setting
Type Auto
Not Installed
Select Auto if a device is
attached to the IDE channel.
LBA (Large Mode Disabled
Auto
LBA stands for "logical block
addressing". Instead of
referring to locations by passing
to the disk a cylinder, head and
sector number (CHS
addressing), the sectors are
serialized so that each just has
an integer number; 0, 1, 2, etc.
up to the total number of
sectors on the disk. Disabled
will disable the LBA mode, Auto
will enable it if the IDE device
supports it. This field is
informational only, for Type
Auto.
Block (Multi-Sector
Transfer)
Disabled
Auto
Enales or disables multiple
sector transfers. This field is
informational only, for Type
Auto.
PI0 Mode Auto
0
1
2
3
4
Select the method for moving
data to/from the drive. This field
is informational only, for Type
Auto. This field is updated to
display only the modes
supported by the attached
device.