Filter
Top Products
TM700 User Guide - Upgrading Your System
4 - 34
■ Take care to prevent bending drive connector pins.
■ Align the cable connector to the matching pins on the drive.
2. Locate an available power connector coming from the power supply.
3. Connect the appropriate power cable (D) to the power connector on the storage
device.
Figure 4 - 28 : Cabling an Optical Device
■ A - Audio Cable - N/A
■ B - IDE cable
■ C - Red edge (Pin 1)
■ D - Power cable
Note: Audio Cable is not available on this system.
Cabling a Hard Disk Drive
All storage devices require power and DATA cable connections. Devices shipped with
the system are already connected.
The following procedures explain how to attach the cables to a hard disk drive.
E-IDE Hard Disk Drive
1. Connect the IDE cable connector (A) to the matching pins on the storage
device.
■ Take care to prevent bending drive connector pins.
■ Align the cable connector to the matching pins on the drive.