Filter
Top Products
TM700 User Guide - Upgrading Your System
4 - 7
1. Take a few moments to examine the interior side of the cover, and notice the 4
metal hooks located on two opposite edges, and the 6 bigger hooks located on a
third edge.
2. Leaving about 1 centimetre to slide the cover forward, lay the cover on the chas-
sis, and check that the metal hooks are ready to be inserted into their correspond-
ing slots. You may find this procedure easier to follow if you lay the unit on the
left side.
3. Make sure the cover is properly inserted; the cover, the chassis and the front
panel should fit squarely together.
4. Secure the two thumb screws in their respective holes.