Filter
Top Products
TM700 User Guide - Configuring Your System
3 - 12
Boot Menu
Boot Device Priority Submenu
Boot Settings Configuration Submenu
Security Submenu
Table 3 - 11: Boot Menu
Feature Choices or
Display Only
Description Your Setting
Boot Device Priority Select sub-menu.
Boot Settings
Configuration
Select sub-menu.
Security Select sub-menu.
Table 3 - 12: Boot Device Submenu
Feature Choices or
Display Only
Description Your Setting
1st Boot Device Floppy Disk Drive
Hard Disk Drive
ATAPI CD-ROM
Disabled
Attempts to boot from an ATAPI
CD-ROM drive.
2nd Boot Device Floppy Disk Drive
Hard Disk Drive
ATAPI CD-ROM
Disabled
Attempts to boot from a hard
disk drive device.
3rd Boot Device Floppy Disk Drive
Hard Disk Drive
ATAPI CD-ROM
Disabled
Attempts to boot from a floppy
disk drive device.
Table 3 - 13: Boot Settings Configuration Submenu
Feature Choices or
Display Only
Description Your Setting
Bootup Num-Lock Off
On
This setting, when enabled,
automatically turns on your
numeric keypad when the
system is booted. This item is a
matter of personal taste.
Table 3 - 14: Security Submenu
Feature Choices or
Display Only
Description Your Setting
Supervisor
Password
Installed
Not Installed
Display only
User Password Installed
Not Installed
Display only
Change Supervisor
Password
[Enter] Press Enter to set/change
supervisor password. You will
be asked to confirm password
by re-typing it. Pressing Enter
instead of a password will set it
as Not Installed.