Filter
Top Products
Reference Board Summary
User’s Manual 29
Document Number: 320264
4.3 Configuration Settings
4.3.1 Configuration Jumpers/Switches
Caution: Do not move jumpers with the power on. Switches may be moved while power is on.
Always turn off the power and unplug the power cord from the computer before
changing jumper settings. Otherwise, damage to the board could occur.
Figure 5
shows the location of the major configuration jumpers and switches. Table 9
summarizes the jumpers and switches and gives their default and optional settings.
The Crown Beach board is shipped with the jumpers and switches shunted in the
default locations.
Figure 5. Location of the Configuration Jumpers/Switches