Intel US15W Computer Hardware User Manual


 
Introduction
User’s Manual 7
Document Number: 320264
1 Introduction
This manual describes the typical hardware set-up procedures, features, and use of
the evaluation board and other components included in the Intel® Atom™ processor
and Intel® System Controller Hub US15W Development Kit. This reference board
supports the Intel® Atom™ processor and Intel® System Controller Hub (Intel®
SCH).
Note: Read this document in its entirety prior to applying power to the motherboard.
Intel recommends having both the schematic and board present while reading this
document.
The references in this document correlate to reference designators and board
properties of Crown Beach FAB F Customer Reference Board.
This manual is intended to be used with the Development Kit but can also be used to
help bring up a Crown Beach Board, although not all associated peripherals will be
included with a board.
1.1 About the Development Kit
The development kit includes the following:
Crown Beach Customer Reference Board with Intel® Atom™ processor Z530
1.6GHz and Intel® System Controller Hub US15W
Pre-installed jumpers
FWH mounted and flashed with EFI
1 GB DDR2 SO-DIMM
VGA SDVO ADD2N Card
80 GB Hard Drive with MIDINUX Embedded OS
DVD-ROM Drive
IDE cable
Mott Canyon 4 with Intel® High Definition Audio (Intel® HD Audio) card
Intel® 82574L Gigabit Ethernet Controller
CD with Chipset and Intel® Embedded Graphics Drivers (IEGD)
Chassis with ATX power supply
Note: Please refer to Section 5.4
for the location of latest appropriate EFI firmware and
driver updates.