Intermec 6620 Personal Computer User Manual


 
SECTION 8 CMOS Setup
6620 Hand-Held Computer Technical Reference 8-5
" Boot Device:
Sets the order in which to search for a bootable drive:
" Scan PC Card slots (default)
" Embedded Flash Drive (EFD)
" Floppy Drive
" Hard Drive
" PC Card Slot–0 Drive
" PC Card Slot–1 Drive
" PC Card Slot–2 Drive
See page 8-13 to learn about the 6620 Drive Mapping.
" Boot Options:
(Submenu press [Enter] to access the submenu)
" Floppy check:
Controls the search for an attached floppy drive
during POST. Leaving this disabled allows for
hot-swapping the floppy drive. Press the [Esc]
key to return to the Main menu.
" Numlock:
Selects the Power-on state for the [Num Lock] key
Auto (default), On, or Off.
" System Memory:
(Read-Only) Displays system memory.