Filter
Top Products
SECTION 36620 Recovery Procedures
3-22 6620 Hand-Held Computer Technical Reference
5. If this window does appear, click the OK button to ac-
tivate the network.
"
NOTE: This window may not appear on the slave system, particularly when
first set up. Either way, go on to the next step.
6. Double-click the Image icon on the Windows desktop
to start the recovery process. You are prompted to en-
ter the name of the MASTER system.
7. Enter the name of the MASTER system, if the default
name (Master) was not used. This prompt times out
after five seconds and will default to “Master”.
The duplication process copies all the files from the
source drive to the destination drive. The progress in-
dicator will not move or give a time-remaining esti-
mate, as the installation engine does not know the size
of your image. This is normal.
8. When the duplication process is complete, click the
Finished button.
The partitions are restored and the system restarts.
Configuring a Source Desktop PC
(MASTER)
1. Prepare the directory tree exactly as you want it set up
on the “Main Data” Partition.
2. Set up networking on the PC. Ensure that the “File
and Print Sharing” function is enabled. See page 3-30
for instructions on how to ensure this function is en-
abled.
3. When the system reboots, log on to Windows or net-
working will not activate.
Do the following to share the (MASTER) directory, contain-
ing the complete directory tree, with the (SLAVE). This di-
rectory must be structured the same as the root of the data
partition, such as having “Windows” as an immediate sub-
directory: