Intermec 6620 Personal Computer User Manual


 
INDEX
Index-2 6620 Hand-Held Computer Technical Reference
CDPD radio
COM port selection, 2-18
creating disks, 2-19
customer support, 9-1
executables
installation diskettes, 2-13
support, 2-13
installation disks, 2-5
installing, 2-26
Sierra Wireless, 9-1
Sierra Wireless Expert, 9-2
toolkit files, 2-5
Watcher, 9-4
CDPD.VXD, 2-5
CDPDDISK.EXE, 2-13
CDPDSUPP.EXE, 2-13
CDSUPP.BAT, 3-4
Client 32 Version 2.50, 3-3
CMOS Editor, 2-6
CMOS error correcting, 1-12
CMOS maintenance utility, 2-9
CMOS Setup, 8-1
auto suspend, 8-11
Aux switch, 8-11
boot device, 8-5
EFD, 8-5
PC Card slots, 8-5
boot options, 8-5
floppy drive check, 8-5
CPU cache, 8-8
CRT power, 8-11
diskette access, 8-9
exit, 8-12
extended memory, 8-6
fixed disk boot sector, 8-9
hard disk power down, 8-10
HDD write cache, 8-8
IDE Adapter
master 0, 8-3
master 1, 8-4
slave 0, 8-3
slave 1, 8-4
integrated peripherals, 8-6
5-volt power, 8-7
Aux port, 8-7
COM ports, 8-7
ethernet, 8-8
Ext COM port, 8-7
IR port, 8-7
IR type, 8-7
LPT port, 8-8
parallel port, 8-8
scanner port, 8-7
numlock, 8-5
password on boot, 8-9
power management, 8-10
power management security,
8-9
radio switch, 8-11
resume charge triggers,
8-11
resume on ring indicate, 8-11
supervisor password, 8-9
suspend to RAM or disk, 8-10
system memory, 8-5
user password, 8-9
video power down, 8-10
CMOS.EXE, 2-6
general utilities, 2-3
COM port selection
CDPD radio, 2-18
ram radio support, 2-17
COM ports, 7-3
addresses – CMOS setup, 8-7
pin 9 – 5 volt power, 8-7
Component executables, 2-13
CONFIG.SYS, recovery, 3-4
Configuring
destination 6620 (SLAVE),
3-21
source 6620 (MASTER), 3-20
source PC (MASTER), 3-22
CPU cache, CMOS setup, 8-8
CRC32.EXE, 2-6
CRT power, CMOS setup, 8-11
Customer support
Intermec Technologies, 1-19
Novell, 3-3
Sierra Wireless, 9-1
Systems Internals, 10-4
D
Decode data packet format bar
code, 1-7
Disk volume imaging tools, 2-9
Diskette access, CMOS setup,
8-9
Display, 1-4
Dock lock utility, 2-4
executable, 2-13
DOCKLOCK.EXE, 2-13
Docks
ac power adapter, 1-9
connections
auxiliary port, 1-9
infrared communication,
1-9
keyboard connector, 1-9
mouse connector, 1-8
network, 1-8
parallel port, 1-8
serial port, 1-8
video connector, 1-8
EEPROM programmer, 2-7
PC development, 1-12
Drive mappings, 8-13, 8-14
Dump utility, 1-13
E
EEPROG.EXE, 2-7
EFD, 8-5
mapping drives, 8-14
Embedded Flash Drive, 8-5
mapping drives, 8-14
ERICMWPC.EXE, 2-13
Ericsson M2100 Series Wireless
executable, 2-13
modem, 6-1
PC Card, 2-3
Ethernet, CMOS setup, 8-8
Ethernet capability, 1-8
Ext COM port, CMOS setup, 8-7
Extended memory, CMOS set-
up, 8-6
F
FILCHK, 10-4
File integrity verification utility,
2-6
File sharing, 3-30
FILEMON, 10-4
sample screen, 10-5
FILEMON.EXE, 10-4
FILEMON.FIL, 10-5