Filter
Top Products
Appendix C: Using the LoopTest Utility
iSPAN PRI PCI ISDN Users Guide 93
1. Access the LoopTest main dialog, as described in steps
1 and 2 of Testing your ISDN Line on page 90.
2. Select Display event list from the Test menu.
To save the event list to an ASCII (text) file, selecting Save or
Save as (to save a previously saved file with a different name)
from the Test menu.
Setting the Number of Frames to Send
You can set the number of frames you want LoopTest to send
during communication.
To set the number of frames to send:
1. Access the LoopTest main dialog, as described in step 2
of Testing your ISDN Line on page 90.
2. Select the Parameters option from the Test menu to
display the Test Parameters dialog.
Figure C-3. LoopTest parameters
3. Enter the number of frames in the Iterations count
field. The higher the iterations count, the longer the test
duration.
(The sub-address is not used for the iSPAN-PRI
testing.)