Filter
Top Products
Chapter 4: Installing the Software
iSPAN PRI PCI ISDN Users Guide 45
Figure 4-18. LoopTest Dialog
3. Select the port number to test (if your adapter has two
PRI ports), and enter your local ISDN number.
4. Click Test.
The LoopTest Utility normally finishes with the
message Test passed in the Diagnostic field.
If the Test passed message does not appear, make sure
that the ISDN number you entered is correct. For more
information about the LoopTest utility and its
diagnostics, see Using the LoopTest Utility on page 89.
5. Do the following to enable the RAS Server again:
a. From the Start menu, select Programs, then
Administrative Tools (Common), and then Access
Admin.
b. From the Server menu, select Start Remote Access
Service to enable the RAS Server.