Filter
Top Products
Installing and Setting Up the Drivers
40 Interphase Corporation
The Remote Access Setup dialog reappears (see
Figure 4-13 on page 39). It now shows one ISDN
channel configured as a RAS port.
4. To quickly configure all ISDN channels with the same
port usage as the first ISDN channel:
a. Click Clone until a message informs you there are
no more ports of the specified type to clone.
b. Click OK.
5. When the Remote Access Setup dialog reappears, do
the following to select the protocols (NetBEUI, TCP/IP,
or IPX) and other settings to be bound to the adapter:
a. Click Network to display the Network
Configuration dialog: