Filter
Top Products
Appendix G: Quick Reference of Common Tasks
iSPAN PRI PCI ISDN Users Guide 121
Enable IPX routing The RIP for NWLink IPX Service must be installed
in the Windows NT Network Services list.
1. From the Start menu, select Settings, and then
Control Panel.
2. Double-click the Network icon, and select the
Protocol tab.
3. From the protocols list, select NWLink IPX/SPX
Compatible Transport, and then click
Properties.
4. Select the Routing tab, and enable the Enable RIP
Routing option.
NOTE: IPX routing is only activated if different IPX
internal network numbers are assigned between the
two network adapters. For more detailed information,
see the Microsoft networking online help.
Enable IP routing 1. From the Start menu, select Settings, and then
Control Panel.
2. Double-click the Network icon, and select the
Protocol tab.
3. From the protocols list, select TCP/IP Protocol,
and then click Properties.
4. Select the Routing tab, and enable the Enable IP
Forwarding option.
If you want to... Do this...