Filter
Top Products
ZyAIR B-4000 Hot Spot Gateway
The Web Configurator 2-1
Chapter 2
The Web Configurator
This chapter introduces how to access the web configurator to perform general system
configuration.
2.1 Introducing the Web Configurator
The web configurator is best viewed with Internet Explorer (version 4.0 or above) or Netscape Navigator
(version 6.0 or above). Your browser must have JavaScript support enabled.
2.2 Accessing the Web Configurator
Follow the steps below to access the web configurator.
The ZyAIR allows only one web configurator session at any one time.
Step 1. Make sure your ZyAIR is properly connected (refer to instructions in the Quick Installation
Guide on hardware installtion and connections).
Step 2. Launch your web browser and type the WAN or LAN IP address of the ZyAIR as the web
address (it is recommended that you connect your computer to the LAN and use the LAN IP
address for initial configuration). 192.168.1.1 is the default IP address for the LAN port.
If you are using a different port number (between 8000 and 8099) for the web server, you must
also append the port number to the LAN IP address seperated with a colon “:”, for example,
http://192.168.1.1:8080
.
Figure 2-1 Entering ZyAIR IP Address in Internet Explorer
Step 3. A login screen displays. Type “admin” (default) as the user name and "1234" (default) as the
password and click Login.
The user name and password are case sensitive.