Filter
Top Products
Apple/Macintosh Environments
July 1998 9-7
M
A
C
I
N
T
O
S
H
4. Save the list and quit TeachText.
5. Double click on the Apple Printer Utility icon.
6. From the plodding menu, select Window and then Selector.
7. If there is a router on the network, select the appropriate zone for the
printer.
8. Select the printer.
Note: When the Printer is opened, a warning may state that this is a
spooler and that all utility features may not work. Click Continue.
9. Select Download PostScript File from the File menu.
10.Select the file to download.
11.When downloading is complete, quit the program.
If an error occurs while downloading a configuration file, an error
message will appear. If a log file is created after downloading a file, an
error occurred.
9.4.6.1 Using the NIC Config File
The table below lists the NIC configuration options that you can change
by editing and downloading the NIC Config.
Note:
Option (Default is in Parenthesis)
Option Choice Description
EtherTalk phase 1 or (2) AppleTalk revision level.
EtherTalk Zone Zone Name AppleTalk zone the printer resides in.
Network Protocols Enabled
Sockets (Yes) or No
LPD (Yes) or No
Interwar (Yes) or No
EtherTalk (Yes) or No
Operational Parameters
Set IP address Set IP Address
(0.0.0.0)
Use to specify an IP address for NIC when
using TCP/IP.
Reset the NIC Yes or (No) Forces the NIC to restart when the printer is
power cycled.
Reset NVRAM to
defaults
Yes or (No) Forces NVRAM values to be returned to their
defaults when the printer is power cycled.