Filter
Top Products
Windows - FastManage Configuration Utilities
July 1998 3-11
F
A
S
T
M
A
N
A
G
E
¥ SNMPAxxxxxxÑThis device was discovered by the SNMP over
NetBIOS (where xxxxxx are the last six digits of the Ethernet address.
For example, a device with an Ethernet address of Ò0040C00702CA,Ó
will have a NetBIOS name of Kd0702CA). You cannot change this
name.
¥ UNKNOWNÑThis device was discovered by the IP protocol; however,
there was no entry in the host table relating to this device. You can add
a name to the device by creating an input entry into a local hosts Þle
on your workstation, i.e. \fm\hosts. Use a standard text editor to do
this. You can change this name.
To toggle between node name and node address, use the Node/Address
icon. See section 3.5.2.
If the Kodak Printer/NIC shows up as a device on the network, you can
double click on the device and the Kodak NIC Manager utility will start up
automatically. Proceed to Section 3.6, Kodak NIC Manager, for
additional instructions for conÞguring the NIC.
If the Kodak Printer/NIC does not show up as a device on the network,
try using a different protocol. If, after trying all three protocols, the NIC still
does not show up, proceed to Chapter 12, Troubleshooting.
3.4.3 Discovery Application Tools
Below is a close-up view of the Discovery application tool bar.
3.4.3.1 Renaming a Discovery Map
1. Click the Rename Map icon (fourth from the left).
A Map Title Editor window appears.
New
Map
Open
Map
Save
Map
Rename
Map
View as
host name or
IP address
Rediscover
Refresh
screen
New
host
Ping
TFTP
Close all
Windows
Node
properties
Help
FastManage_025