Filter
Top Products
Windows - FastManage Configuration Utilities
3-16 July 1998
F
A
S
T
M
A
N
A
G
E
3.4.4.5 Protocols
¥ Enable IP, Enable IPX, Enable NetBIOS - after installation, Discovery
protocols may be selected and de-selected using this menu.
Note: If you disable all protocols and then close Discovery, Discovery will
not be able to start up again, so you will not be able to select a
protocol using this menu. To recover from this situation, edit the
issnmp.ini Þle and replace ÒNOÓ with ÒYESÓ in one of the protocol
statements, i.e. ÒIP=NOÓ, ÒIPX=NOÓ, and ÒNETBIOS=NOÓ.
3.4.4.6 IP Parameters
¥ Use DNS: Use ÒDomain Naming SevicesÓ to reference nodes.
¥ Poll IP Range: Traverses through the IP address range for that
subnet, discovers each host through SNMP, and displays those that
respond.
¥ Do IP Broadcast: If this checkbox is selected, perform IP Discovery.
¥ Every: Re-discovers hosts every <n> seconds.