Filter
Top Products
Kodak 10/100 NIC Introduction and Configuration
1-6 July 1998
I
N
T
R
O
D
U
C
T
I
O
N
Step 1:Determine your Network and Printing Environment. (Ch1:Intro/Overview)
NIC supports TCP/IP, Novell Netware, AppleTalk & Native Windows (NetBeui) Protocols.
Step 2: Gather Necessary Hardware & Software Components. (Ch1:Intro/Overview)
NIC, NIC ConÞg S/W, Printer, Printer ConÞg S/W, i.e.PostScript Drivers and Raster Export
Modules
NIC Pre-installed in Printer?
Step 3: Install the NIC in the Printer.
(Ch2:NIC Install) Requires NIC, Phillips or
T10 Torque Screwdriver, and Static Strap.
No
Yes
Step 4: ConÞgure the NIC. (Ch3:FastManage, Ch9:Apple/Macintosh, Appendix: A Telnet)
Recommendation: Use defaults until successful network printing is demonstrated.
Complete the following if using TCP/IP. (TCP/IP minimally requires an IP Address).
The quickest method (when IP = 0.0.0.0) is to use ÒarpÓ and ÒtelnetÓ commands.
1) Set NIC mode switches in Telnet mode (D1 up, D2 down) and power cycle printer.
2) Use arp -s <IP Address> <NIC Ethernet Address>
3) Use telnet <IP Address> 2002.
5) Follow Telnet Ethernet>TCP/IP>Set IP menus to set IP address and then Reset the NIC.
6) Power cycle the printer.
Use Server
Print Queues?
Step 5:ConÞgure Server (Ch4:Novell, Ch7/8 Windows
NT, Ch10:Unix)
Yes
No
Step 6: ConÞgure Workstations for PostScript and/or Raster Mode Printing. (Ch5-8
Windows, Ch9 Macintosh)
Install proper PostScript Driver (for printer in PostScript mode) and/or Kodak Export Module
plug-in (for printer in raster mode).
Step7:Printer in PostScript Mode
(Ch11:Printing)
Use File > Print
from Applications and
Select the Kodak Printer.
Step7:Printer in Raster Mode
(Ch11:Printing)
Use File > Export
from Adobe PhotoShop and Select
the Kodak Printer.
Printer/NIC Installation and ConÞguration Overview