Filter
Top Products
8-30 A-61140 January 2000
Horizontal print
position
The horizontal print position of the front Document Printer is manually
set in one of 12 positions on the front Document Printer mounting plate.
The horizontal print position of the rear Document Printer is manually set
in one of 6 positions on the rear Document Printer mounting plate.
The 12 front print positions are indicated with F1 through F12. The 6 rear
print positions are indicated with F1 through R6 on the label on the feed
tray.
Front print positions
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12
To change the horizontal print position:
• Set the printer into the desired print position so the notched tab fits
into the detent position on the Document Printer mounting plate.
CAUTION: Open and close the lower access door slowly.
NOTE: The front Document Printer is secured to the mounting
plate by magnets. The rear Document Printer is secured to
the mounting plate with the same magnets and two spring
clips.
To remove the rear Document Printer, compress the two
spring clips and lift the printer out of the mounting plate.