Filter
Top Products
A-61140 January 2000 8-11
9. Prepare the bar code to be evaluated by cutting around the bar code
so only the vertical black and white bars remain. Cut away all text
and surrounding marks or illustrations.
NOTE: The bar code used must be the same type indicated in the
first line of the status display of the first page.
Document and
surrounding text
10. Use transparent adhesive tape to adhere the bar code to the
appropriate imaging guide in the proper direction. If the Bar Code
Reader is set to read data through the front scan module, adhere the
bar code to the front imaging guide and ensure that the bar code is
facing the front scan module. If the Bar Code Reader is set to read
data through the rear scan module, adhere the bar code to the rear
imaging guide and ensure that the bar code is facing the rear scan
module.
Transparent
adhesive tape
Bar code (should
face the front of the
scanner)
Front image guide (surface
facing the rear of the
scanner