Filter
Top Products
5-20 A-61140 January 1999
Replacing the feeder
module and separator
roller
To replace the feeder module and separator roller, follow the steps
below:
Replacing the feeder module:
1. Open the front cover.
2. Push the roller cover release lever toward the back of the machine.
3. Grasp and rotate the roller cover toward the back of the machine,
exposing the feeder module and separator roller.
4. Remove the feeder module by pushing it to the right and lifting it out
of its position.
5. Reinsert a new feeder module, by aligning the pins and fitting it into
position.
Roller cover
release lever
Roller cover
Feeder
module