Kodak 7520 Scanner User Manual


 
A-61140 January 2000 8-5
Bar code placement
Bar codes must appear with the bars perpendicular to the leading edge of
the document:
Leading edge
(fed into transport first)
Trailing edge
In addition, the following must be true:
The bar code must be at least 0.25 in. (6.3 mm) from the leading
edge of the document.
The bar code must be at least 0.25 in. (6.3 mm) from the trailing
edge of the document.
There must be at least 0.25 in. (6.3 mm) of blank space preceding
the start character and following the stop character.
The bar code may not exceed 11 in. (275 mm) in length.
The bar code height must be at least 0.40 in. (9.5 mm) or 25% of the
bar code length, whichever is greater.
More detailed specifications are provided in Kodak publication, Bar Code
Made Easy (A-61099).
Before you begin Before feeding documents containing bar codes, verify the following:
Bar code reading is enabled in the current mode.
The bar code confirmation tone is enabled (if desired).
A bar code test has been performed and the read rate/accuracy is
satisfactory.
Once each of these items has been verified, you may begin feeding
documents.