Filter
Top Products
A-61140 January 2000 6-9
Code Message Displayed Description/Action Required
E295 Rr Cal Fail - calibration reqrd A calibration failure was detected in the rear scan
module. Press Cal to calibrate the scanner. If the
error persists, verify the optical path is free of
obstructions, clean the imaging guides and replace
the front and rear lamps.
E000 -
E666
various messages Follow the procedures indicated on the display. If the
error persists, turn the scanner off and then on again.
If error still persists, call Service.
E700 -
E799
various messages Follow the procedures indicated on the display. If the
error persists, turn the scanner off and then on again.
If error still persists, call Service.
E800 -
E899
various messages Follow the procedures indicated on the display. If the
error persists, turn the scanner off and then on again.
If error still persists, call Service.
E900 -
E999
various messages Follow the procedures indicated on the display. If the
error persists, turn the scanner off and then on again.
If error still persists, call Service.