Filter
Top Products
4-6 A-61140 January 2000
Code Function Code Name Description
F46 Front Document Printer
Vertical Start Print Position
Allows you to specify how far from the leading edge of the
document printed information will appear. Use the numeric
keys to input values between 0.125 and 20 inches (3 to
508 mm) in increments of 0.125 (3mm). The value will
correspond to the selected measurement system and
should not exceed the document length. The horizontal
start print position is changed manually.
F47 Rear Document Printer
Vertical Start Print Position
Allows you to specify how far from the leading edge of the
document printed information will appear. Use the numeric
keys to input values between 0.125 and 20 inches (3 to
508 mm) in increments of 0.125 (3mm). The value will
correspond to the selected measurement system and
should not exceed the document length. The horizontal
start print position is changed manually.
F48 Purge Print Heads Allows you to purge and clean slightly hardened ink from
the print head of the document printers. Feed a single
blank document after the feed clutch engages.
F50 Patch Reader On/Off Allows you to turn the Patch Reader on or off. Enter 1 to
turn on or 0 to turn off, then press Enter.
F53 Patch Reader Confirmation
Tone On/Off
Allows you to turn the confirmation tone on or off which
informs you when the Patch Reader has successfully read
a patch document. Enter 1 to turn on or 0 to turn off, then
press Enter.
F54 Omit Patch Reading on
Next Document On/Off
Allows you to omit patch reading on the next document
scanned. Normal patch reading resumes with subsequent
documents. Enter 1 to turn on or 0 to turn off, then press
Enter.
F55 Patch Test Allows you to test for patch position and patch quality. The
test result will indicate: T-Patch, 2-Patch, 3-Patch or
Patch Not Read.
F60 Bar Code Reader On/Off Allows you to turn bar code reading on or off. Enter 1 to
turn on or 0 to turn off and then press Enter.
F63 Bar Code Reader
Confirmation Tone
Allows you to turn the confirmation tone on or off which
informs you when the Bar Code Reader has successfully
read a bar code document. Enter 1 to turn on or 0 to turn
off and then press Enter.
F64 Omit Bar Code Reading on
the Next Document Only
Allows you to omit bar code reading on the next document
scanned. Bar Code Reading will resume on subsequent
documents. Enter 1 to turn on or 0 to turn off, then press
Enter.
F65 Bar Code Test
Allows you to perform a test to verify bar code position, bar
code quality and bar code read rate.