Konica Minolta IV Scanner User Manual


 
4 FOR PROPER AND SAFE USE
Read and understand all warnings and cautions before using this product.
WARNING
Use only within the voltage range specified on the unit. Inappropriate current may
cause damage or injury through fire or electric shock.
Use only the specified AC adapter (Ya Hsin Industrial 019-240840) within the voltage
range indicated on the adapter unit. An inappropriate adapter or current may cause
damage or injury through fire or electric shock.
Do not disassemble this product. Electric shock may cause injury if a high-voltage
circuit inside the product is touched. Take the product to a Minolta Service Facility
when repairs are required.
Immediately unplug the unit and discontinue use if the product is dropped or
subjected to an impact in which the interior is exposed. The continued use of a
damaged product may cause injuries or fire.
Store this product out of reach of children. Be careful when around children not to
harm them with the product or parts.
Do not operate this product or handle the power cord with wet hands. Do not place a
container with liquid near the product. If liquid comes in contact with the product,
immediately unplug the unit. The continued use of a product exposed to a liquid may
cause damage or injury through fire or electric shock.
Do not insert hands, inflammable objects, or metal objects such as paper clips or
staples into this product. It may cause damage or injury through fire or electric shock.
Discontinue use if an object enters the product.
Do not use the product near inflammable gases or liquids such as gasoline, benzine,
or paint thinner. Do not use inflammable products such as alcohol, benzine, or paint
thinner to clean the product. The use of inflammable cleaners and solvents may
cause an explosion or fire.
When unplugging the unit, do not pull on the power cord. Hold the adapter unit when
removing it from an outlet.
Do not damage, twist, modify, heat, or place heavy objects on the power cord. A
damaged cord may cause damage or injury through fire or electric shock.
If the product emits a strange odor, heat, or smoke, discontinue use. Immediately
unplug the product. The continued use of a damaged product or part may cause
injuries or fire.
Take the product to a Konica Minolta service facility when repairs are required.
CAUTION
Damage or injury through fire or electric shock may result if the product is used or
stored in the following conditions:
In humid or dusty environments
In direct sunlight or hot environments
In smoky or oily areas
In unventilated areas
On unstable or unlevel surfaces
FOR PROPER AND SAFE USE