Filter
Top Products
To select file names. The automatic option names files based on the date and time of
the scan; the file name begins with DS followed sets of two registers to indicate the
year, month, day, hour, minute, and second. DS040523134510 was scanned in 2004
on May 23
rd
at 1:45pm and 10 seconds. The hour registers are based on a 24-hour
clock. The manual option uses the name entered in the text box plus a four digit serial
number which is automatically added.
Click the OK button to complete the operation. For advanced Batch Scan setup, see
the following page.
77
When the Batch Scan Utility button in the launcher
window is clicked, the scanner will initialize. When the
set-holder message appears, insert the holder into the
scanner; all the frames in the holder will be scanned
and saved, and the holder will be ejected
automatically.
To scan another batch, change the film in the holder
and reinsert it into the scanner. Click the Batch Scan
Utility button to begin scanning. The scanner only
initializes before the first holder is scanned.
To select the destination of the scanned images. Click the view button to open the file-
destination dialog box. Use the folder tree to locate the folder in which to save the files.
Click the folder to select it. Click the OK button to complete the operation. The
destination will be displayed in the setting window.
If the Batch Scan Utility is allocated to the Quick Scan button with the drop-down menu
at the bottom of the launcher, the first time the Quick Scan button is pressed the
scanner initializes and then the message to insert the holder is displayed. To scan
subsequent holders, simply insert the holder and press the Quick Scan button.