Filter
Top Products
FS-1010
5-29
5-2-9 Removing the laser scanner unit and the eraser lamp
1. Remove the process unit (See page 5-4).
2. Remove the top cover/face-down output tray, right cover, and the left cover (See pages 5-5 and
5-6).
3. Remove four connectors 1.
4. Remove five screws 2 and four screws 3.
5. While keeping the ground joint plate 4 away from the LSU plate 5, remove the LSU plate.
Figure 5-2-28 Removing the LSU plate
2
5
1
3
2
4