Filter
Top Products
3-8
FS-1010
(1) Cleaning the registration roller
Use the supplied wiper cloth 1 to clean dust and dirt away from the registration roller 2 (metal).
Figure 3-1-5 Cleaning the registration roller
(2) Cleaning the main charger wire
Slide the charger cleaner knob (green colored) back and forth 2 to 3 times, then return it to its
[CLEANER HOME POSITION].
1
1
Figure 3-1-6 Cleaning the main charger wire
After cleaning is done, install the process unit in the printer, using the reverse manner as above.
Close the front cover and top cover.
2
1