Filter
Top Products
C-6
FS-1010
USB interface
This printer supports the USB (Universal Serial Bus) Revision 1.1 standards. USB interface
specifications and interface signals are as follows:
Item Specifications
Basic specification Complies with the USB Revision 1.1 standards.
Connectors Printer: B-type receptacle (female) with upstream port
Cable: B-type plug (male)
Cable Use shielded cable that complies with the USB Revision 1.1 standards and
not longer than 5 meters (16 feet).
Transfer mode Full speed (max. 12 Mbps)
Power control Self-power device
No. Signal Description
1 Vbus Power supply (+5 V)
2D-Data transmission
3D+Data transmission
4 GND Signal ground Shell Shield
Shell: Shield
USB interface pin assignment
21
34
Shell