Kyocera FS-1010 Printer User Manual


 
3-9
FS-1010
3-1-4 Updating the firmware
Updating the system (controller) firmware is possible by downloading the firmware through the
parallel interface or through the memory card (CompactFlash). These firmware programs are directly
overwritten in the system DIMM [board KP-893] (Flash ROM type only) on the main board.
The operator panel message in different languages can also be downloaded through the parallel
interface or through the memory card (CompactFlash).
(1) Firmware program data format
Kyocera supplies the following types of data for updating firmware of the different purposes:
• System firmware
The data to be downloaded are supplied in the following format:
Figure 3-1-9 Firmware program data format
A94K8000.bcmp
Boot program is included.
ID code for Kyocera
Machine code: FS-1010 (A94)
compression
Version code: Version 80.00
System firmware file name example