Filter
Top Products
Preparation for Usage 2-5
1 Open the MP tray.
2 Adjust the paper width guides to the width of the paper.
3 Insert the paper along the paper width guides into the tray until it
stops.
Note When you load custom size paper, enter the paper size by
referring to Specifying the Paper Size for the MP Tray on page 2-9.
When you use special paper such as transparencies or thick
paper, select the media type by referring to Specifying the Media
Type for the MP Tray on page 2-13.
IMPORTANT Keep the side that was closest the package seal
facing up.
Curled paper must be uncurled before use.
Straighten the top edge if it is curled.
When loading paper, always adjust the paper width guides to the
width of the paper. If you butt the paper up against either side of
the MP tray and then use the machine without adjusting the paper
width guides to the width of the paper, the machine will
malfunction.