Basic Operation 3-13
Split Mode
Use Split mode to create single-sided copies from two-sided originals or
originals with facing pages (such as books or magazines) as follows.
Two-sided to One-sided
Copies each side of a two-sided original onto two individual sheets.
The following binding options are available.
• Binding Left/Right: The back side and front side of the original are
copied with the same orientation.
• Binding Top: The back side is copied rotated 180 ° from the
orientation of the front side.
Book to One-sided
Copies each page of originals with facing pages (such as books or
magazines) onto two individual sheets.
The following binding options are available.
• Binding Left: Originals with facing pages are copied from left to right.
• Binding Right: Originals with facing pages are copied from right to
left.
Follow the steps as below to use Split mode.
1 Press [Function].
2 Press [Duplex].
2
1
1
2
Original Copy
Note This operation requires the optional document processor.
2
1
21
Original Copy
Note Original sizes for split mode copy mode are limited to
11 × 17", 8 1/2 × 11", A3, B4, A4R, B5R and 8K. Paper sizes are
limited to 11 × 8 1/2", A4, B5 and 16K. Change the paper size to fit
the original to that size.
P
ProgramFunctionUser choiceBasic
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
MP Tray
Plain
APS
Auto %
Zoom
100%
Density
Auto
Sta
p
Sta
p
Lef
t
Off
Ready to copy.
Density
ProgramFunctionUser choiceBasic
Density Zoom
Cover
Booklet
Continuous
Scan
Mixed Size
Originals
Border
Paper
Original
Duplex
Margin/
Centering
Collate/
Offset
Original
Size
Page #
Combine
Ready to copy.
Selection
Image
Erase