Filter
Top Products
Basic Operation 3-5
Adjusting Density
Adjust the density automatically or manually. The default setting is
[Manual]. Follow the steps as below for Manual mode.
1 Place the original.
2 Press the density adjustment key ( / ) to adjust the density.
Press [Auto Density] to use Auto Density. The machine determines a
suitable density for copying. To change the density from [Auto] to
[Manual], press the density adjustment key ( / ).
3 Press the Start key. Copying begins.
ProgramFunctionUser choiceBasic
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
MP Tray
Plain
APS
Auto %
Zoom
100%
Density
Auto
Sta
p
Sta
p
Lef
t
Off
Ready to copy.
Density
Note Press [Density] to display the Density screen. You can
also adjust the density from this screen.