Filter
Top Products
Preparing for a Network Connection
3 - 4 Windows NT 4.0 Configuration
Installing the Multi Direct Print Application
1
Insert the CD-ROM that comes with your printer into your computer's CD-ROM drive.
•
If the installer starts automatically, you can use it to install Multi Direct Print, and set up
the printer driver, and then go to step 6.
2
Open [Control Panel], and double click the [Add/Remove Programs] icon.
3
In the [Install/Uninstall] tab, click [Install].
4
Click [Next >].
5
Enter the name of the CD-ROM drive in the [Command line for installation pro-gram] box,
followed by “:\NETWORK\MDP\DISK1\SETUP” (do not include the quotation marks),
and then click [Finish].
•
An example would be “D:\NETWORK\MDP\DISK1\SETUP” when the drive letter is
“D”.
6
After the [Welcome] dialog appears, click [Next >].
7
After the [Setup Complete] dialog appears, click [Yes, I want to restart my computer now.],
and click [Finish].
•
The computer restarts, and Multi Direct Print can now be used. If you select “No”, be
sure to restart your computer manually before starting Multi Direct Print for the first
time.
Follow these instructions to install Multi Direct Print.
•
You must restart your computer after installing Multi Direct Print. Be sure to close all
applications before beginning the installation process.
•
You must install Multi Direct Print and the appropriate printer driver in order to print.
If you print, using the TCP/IP protocol, to be able to browse the printer via the
network, PRINTER MANAGER FOR CLIENT needs to be installed. If the installer
starts automatically with the AutoRun program, you can install both of these
programs.
•
To install this software you must be logged on as a member of the
Administrators group.