Filter
Top Products
Setting Up a Client Computer
3 - 8 Windows NT 4.0 Configuration
8
Click [OK].
9
Confirm that the port name is displayed in the [Print to the following port] box, then click
[OK]
.
Windows NT 4.0
1
Click [Start], point to [Settings], and then click [Printers].
2
Double-click the [Add Printer] icon.
•
This launches the Add Printer Wizard.
3
Click [Network printer server], and click [Next >].
4
In the [Shared Printers] box, double-click the name of the computer used as a print server.
•
The printers attached to the network are displayed.
5
Highlight the printer you want to use by clicking it, and click [OK].
•
If the printer driver is not installed in the print server, a message appears. If a driver has
been installed on the client, click [OK], and follow the instructions on the screen.
•
There is a Windows NT printer driver in the CD-ROM that comes with the printer.
6
Select whether you use this printer as the default printer, and click [Next >].
7
After installation is complete, click [Finish].
•
The icon of the newly installed printer appears in the [Printers]
window.
Use the [Printers] window to set up the printer.