Filter
Top Products
Netware 4.x, 5- Advanced Settings
NetWare Configuration 4 - 13
•
For more information on NWAdmin, see the documentation that comes with the
NetWare.
11
Create a print queue as follows.
•
Select the container object the print queue is located in among those in the
directory tree, and click [Create] in the [Object] menu.
•
In the [Class of new object] box, click “Print Queue” to highlight it, and click
[OK].
•
In the [Print Queue name] box, enter the name of the print queue.
•
In the [Print Queue Volume] box, click Browse button.
•
In the [Available objects] box, click the volume in which the print queue is
created to highlight it, and click [OK].
•
Select the volume on the file server specified in the NIC Setup Tool.
•
After confirming the settings, click [Create].
12
Create a printer as follows.
•
Select the container object the printer is located in, and click [Create] in the
[Object] menu.
•
In the [Class of new object] box, click “Printer” to highlight it, and click [OK].
When you are using the NetWare 5, click “Printer (Non NDPS)”.
•
In the [Printer name] box, enter the name of the printer.
•
Click [Define additional properties] to place ' mark, and click [Create].
13
Assign print queues to the created printer as follows.
•
Click [Assignments], and click [Add] in the [Assignments] group.
•
In the [Available objects] box, click the queue created in the step K to high-light
it, and click [OK].
•
Click [Configuration], and in the [Printer type] box, select [Parallel] using the
drop-down menu, and then click [Communication].
•
Click [Manual load] in the [Communication type] group, and click [OK].
•
After confirming the settings, click [OK].
14
Create a print server as follows.
•
Select the context specified using the NIC Setup Tool, and in the [Object] menu,
click [Create].
•
In the [Class of new object] box, click “Print Server” to highlight it, and click
[OK]. When you are using the NetWare 5, click “Print Sever (Non NDPS)”.
•
In the [Print Server name] box, enter the name of the print server.
•
Use the same name as that specified using the NIC Setup Tool.
•
Click [Define additional properties] to place ' mark, and click [Create].
15
Assign the printer to the created print server as follows.